geniusintraining
Lifetime Supporting Member + Moderator
I checked AD first... they do not have a solid state 120v coil with 24vdc out, they only have 24AC out, the one you linked is a mechanical relay
AC power sensing module
- Thread starter rpoet
- Start date
I checked AD first... they do not have a solid state 120v coil with 24vdc out, they only have 24AC out, the one you linked is a mechanical relay
geniusintraining
Lifetime Supporting Member + Moderator
For a SS you would need PN RV8S-L-D24-A120 OR RV8S-S-D24-A120, both cost more
Gene Bond
Member
Sorry about that, but I just checked out of curiosity, and it appears they pull about the same power, so the micro electro-mechanical relay may be a valid choice.
Phoenix: 5.6ma, AD (Klemsan) .7VA (6ma)
geniusintraining
Lifetime Supporting Member + Moderator
No reason to be sorry... we are all just trying to help each other, I was surprised that AD only offered 24VAC on the output side
Similar Topics
I have a requirement to sense the true power used by a submersible pump so that I can monitor pump performance. Anyone using anything that can do...
Good morning, I'm searching for a power supply to convert 3 phase 480VAC to 120VAC and 24vdc. Is there an all-in-one power supply like this on the...
Hi,
i am using DVP-14SS2 PLC, after program written to plc, when power is reset, plc doesn't run. always need to connect to pc for the run mode.
Hello all,
I am currently trying to program a PowerFlex 525, version 7.0. We had a power outage recently and when the power was restored, the...
Looking at installing point io, with a 1734-AENTR communications adapter and ten 1734-IT2L modules. In IAB it installs a 1734-EP24DC after every...