Hi, I only have the RSLogix Micro starter edition and cannot save as .SLC for the micrologix to micro800 conversion tool on CCW. I would be very appreciative if someone could convert it with database and as Logix file type.
In looking through your file I do have a programming tip that will make a difference on the relatively slow ML PLC's and will effect larger SLC and ControlLogix PLC scans too.
Looking at rung 2:15 as written there is a nested, second branch instruction that can be deleted completely and save the CPU 2 instructions being processed every scan, and since it's a branch a third step setting the branch in memory. Plus this program has more than one line written like this, so thats a few steps every rung every scan.