Control Freak
Member
- Join Date
- Jul 2004
- Posts
- 44
Anyone have any simple ways to decode the 10 bit grey scale code from an absolute encoder? My customer spec'd this unit and now I get to figure it out. I know some PLC's have decoder functions, however I know very little about them. In this case I'll be using a GE series 90-30 with an IC693APU305 (some processor module), also spec'd by the customer.
Silly me, doing it the easy way with Prog Limit Switches all this time. Way too easy, I suppose.
Silly me, doing it the easy way with Prog Limit Switches all this time. Way too easy, I suppose.