Hey everyone,
I ran into a problem with my computer a couple months ago where it shut down and would not boot. I chased the problem down to some faulty RAM sticks and a bad PSU. Since then, everything was running fine besides some comm problems that I fixed thanks to the help from the lovely people on this forum. However, yesterday I ran into the same problem except that the RAM sticks were not bad. The entire motherboard and CPU fried themselves.
I got another computer set up and running with RSLinx v2.40, RSLogix 5000 v11.11, and RSView32 v6.30. I set up the communication path to the PLC via Ethernet/IP. I also installed TrendX to get my HMI up and running.
My problem is that when I load up the HMI, I get a bunch of errors regarding the OPC server and that there is a communication error with the tag database.
My question is this: I have access to the files from the old hard drive, so is there a way that I can simply migrate my Tag Database over from it? Or do I have to configure the entire OPC server from scratch?
Thanks for the help,
Alex
I ran into a problem with my computer a couple months ago where it shut down and would not boot. I chased the problem down to some faulty RAM sticks and a bad PSU. Since then, everything was running fine besides some comm problems that I fixed thanks to the help from the lovely people on this forum. However, yesterday I ran into the same problem except that the RAM sticks were not bad. The entire motherboard and CPU fried themselves.
I got another computer set up and running with RSLinx v2.40, RSLogix 5000 v11.11, and RSView32 v6.30. I set up the communication path to the PLC via Ethernet/IP. I also installed TrendX to get my HMI up and running.
My problem is that when I load up the HMI, I get a bunch of errors regarding the OPC server and that there is a communication error with the tag database.
My question is this: I have access to the files from the old hard drive, so is there a way that I can simply migrate my Tag Database over from it? Or do I have to configure the entire OPC server from scratch?
Thanks for the help,
Alex