Flex I/O

smohamed

Member
S
Join Date
Mar 2008
Location
ON
Posts
108
Hey everyone.

Have another question, this time regarding Flex I/O. We're using a ControlLogix PLC (via Ethernet) and Flex I/O, specifically a 1794-IB10XOB6 to bring in some Inputs and Outputs.

We've configured the internal dial to 2, and can see our inputs coming into the PLC with no problems. However, our outputs do not come on through the Flex I/O. Specifically, we do not see them come on on the Flex I/O unit itself.

Any ideas?

Thanks.
 

Similar Topics

G
Powerflex 40 Firmware update
Hello Everyone, I want to upgrade the firmware of Powerflex 40 from 5.001 to 6.002 can anyone tell me how can I do that?
Replies
0
Views
49
ghulamshoaib
G
A
Communication Issues between PowerFlex 700 and M580 Controller
Hello, I am currently in the final week of my internship and I have encountered issues with communication between a PowerFlex 700 variable...
Replies
8
Views
235
Lare
L
M
DeviceNet-Powerflex 70 VFD
Hi there, I have above mentioned VFD which is communicating to my control logix(L62) plc using devicenet DNB scanner(plc side) and 20-comm-D card...
Replies
3
Views
184
MarvelJoe872
M
N
PowerFlex 252 - The Software Has Encountered An Unexpected Error
Hi, I'm currently having issued with a PowerFlex 252. It was working fine last week, and suddenly decided to stop working. When I go into...
Replies
2
Views
123
nievesdelimon
N
N
AB Powerflex 525 Date Type
Hello, I'm hoping someone can help me with understanding how to set/change these data types. We recently swapped from Invertek to AB drives...
Replies
1
Views
107
robertmee
R
Back
Top Bottom