Micrologix1200 as an IO device to Citect Scada

akosimalakas

Member
A
Join Date
Aug 2020
Location
Manila
Posts
16
How to check the communication between the Micrologix1200 to Citect SCADA. I use PLX51-DF1-ENI router to communicate in scada.
I tried to use protocol ABMLXEIP but still not having data from plc. I can remotely connect in plc using RSlogix500 by ethernet.
 

Similar Topics

L
Remote display for timers on micrologix1200
I have a micrologix 1200 that will run one of three different timing sequence, depending on which input is triggered. I'm trying to find the best...
Replies
6
Views
3,456
GaryS
G
W
ASCII READ Error 0Eh on Micrologix1200
I have a micrologix 1200 and I am trying to get a barcode scanner to talk to the COM 0 port. I know the scanner baude rate is 9600 because I...
Replies
0
Views
1,777
Wiggum11
W
S
Hooking Up MAC Bullet Valve To MicroLogix1200
Good day all. I have a some MAC bullet valve catrtidges (BV210A-CA1-00-BEH0-CTC). They control vacuum for suction cups that pick up various...
Replies
0
Views
1,615
SirCharles1
S
J
Micrologix1200 Communication.....
Can I communicate to a Micrologix 1200, going through a Panelview C600? I have this machine made by SIDEL that has a Micrologix 1200 talking to a...
Replies
4
Views
1,489
Ken Roach
Ken Roach
S
Software for MicroLogix1200
Good day all. What is the exact software that is required to program the MicroLogix 1200. I know it is RSLogix but what type. They have...
Replies
7
Views
13,832
crawler009
C
Back
Top Bottom