bruno_michel
Member
Hello I am bruno new in using siemens PLC
I have the following siemens PLC s7400H redundant system system :
1-PS(407) +CPU 412-3H + CP 443-1
2-ET 200M distibuted I/O using IM153-2 and SM 300.
I want to show all the status of all this modules in HMI using InTouch10.0 wonderware.
I have to show everyhting like : CPU master , stanby , faults...
CP run , faults
Battery Failed
which profibus is activated now ????
I/O status : failed , error
to end i have to show everything.
I tried to use SFC51 with SZL_ID 19 and 74 but i dont know how to read th output
Please if anyone can help to realize this ??? with SFC51 or with FB125 ??
Thanks
Bruno
I have the following siemens PLC s7400H redundant system system :
1-PS(407) +CPU 412-3H + CP 443-1
2-ET 200M distibuted I/O using IM153-2 and SM 300.
I want to show all the status of all this modules in HMI using InTouch10.0 wonderware.
I have to show everyhting like : CPU master , stanby , faults...
CP run , faults
Battery Failed
which profibus is activated now ????
I/O status : failed , error
to end i have to show everything.
I tried to use SFC51 with SZL_ID 19 and 74 but i dont know how to read th output
Please if anyone can help to realize this ??? with SFC51 or with FB125 ??
Thanks
Bruno