Hello everyone!
I am using (or planning on using) a RedLion ProducTVity station to display various plant alarms in our maintenance shop. I have several different ControlLogix processors that will be communicating via Ethernet. In the logic editor, I would like to use a few different tags to turn on an output for an audible alarm. I added a CSDIO14 module to the project and was going to map it out but it looks like you can only map physical inputs to the outputs. Is that correct or can I turn on an output based on the value of a tag? I don't have much experience with Crimson so any help I can get is appreciated.
Thank you!
I am using (or planning on using) a RedLion ProducTVity station to display various plant alarms in our maintenance shop. I have several different ControlLogix processors that will be communicating via Ethernet. In the logic editor, I would like to use a few different tags to turn on an output for an audible alarm. I added a CSDIO14 module to the project and was going to map it out but it looks like you can only map physical inputs to the outputs. Is that correct or can I turn on an output based on the value of a tag? I don't have much experience with Crimson so any help I can get is appreciated.
Thank you!