AClarke678
Member
Hi everyone,
I am trying to read a Modbus register in an Intelipro Unit with a S7-1200 over Modbus TCP using MB_Client. But i'm not able to receive any data through modbus client function. I am getting 16#7006 status on my modbus block stating that info is being received but the done bit is never getting activated.
I have been on with both Siemens and Comap and both companies claim I have everything set up correctly either end.
I have attached screenshots of my setup. if anyone can spot something. Any help would be greatly appreciated.
I am trying to read a Modbus register in an Intelipro Unit with a S7-1200 over Modbus TCP using MB_Client. But i'm not able to receive any data through modbus client function. I am getting 16#7006 status on my modbus block stating that info is being received but the done bit is never getting activated.
I have been on with both Siemens and Comap and both companies claim I have everything set up correctly either end.
I have attached screenshots of my setup. if anyone can spot something. Any help would be greatly appreciated.