Lovell
Member
Hello fellow members,
I have a project that has supplied the Rice Lake 920i with Ethernet TCP/IP® Interface 71986 (a Lantronix device). Internally it is an Ethernet to serial device and the serial connection must be hardwired to the main board. Commands strings to get the weight must be sent and it will reply with the gross weight.
I have a 1756-L81E to talk to it over ethernet. Has anyone successfully setup communication between the likes of these two devices? Any tips?
I am requesting they change the communication module to a EtherNet/IP® Interface 87803 which would make things more compatible but I am not sure they will give this to me.
Thanks in advance for sharing your exp.
I have a project that has supplied the Rice Lake 920i with Ethernet TCP/IP® Interface 71986 (a Lantronix device). Internally it is an Ethernet to serial device and the serial connection must be hardwired to the main board. Commands strings to get the weight must be sent and it will reply with the gross weight.
I have a 1756-L81E to talk to it over ethernet. Has anyone successfully setup communication between the likes of these two devices? Any tips?
I am requesting they change the communication module to a EtherNet/IP® Interface 87803 which would make things more compatible but I am not sure they will give this to me.
Thanks in advance for sharing your exp.