phuz
Member
It's been a bit since I've used tag alarms in SE, and I'm having trouble showing them.
I have a digital tag, with the alarm checkbox CHECKED, and I have toggled it in the PLC but the HMI Tag Alarm Summary shows nothing.
The alarm monitor starts with my macro (AlarmOn). I can't remember if there is another step to get these to populate.
I have a digital tag, with the alarm checkbox CHECKED, and I have toggled it in the PLC but the HMI Tag Alarm Summary shows nothing.
The alarm monitor starts with my macro (AlarmOn). I can't remember if there is another step to get these to populate.