Hello,
I am having some problems connecting these two softwares. I will explain:
I have a program in Unity Pro, i tested and i have it in simulation because i do not have a plc available. So i set adress to 127.0.0.1 simulation mode. Till here everything is perfect.
I have a project in CitectScada and i have no idea how to configure it to connect to Unity Pro. I go to Express I/o setup and the option Are Create a new I/o Server, next create a new I/o Device, after select the type of I/O so u basically have an idea.
If somebody could help i would be extremely thankfull.
Regards
I am having some problems connecting these two softwares. I will explain:
I have a program in Unity Pro, i tested and i have it in simulation because i do not have a plc available. So i set adress to 127.0.0.1 simulation mode. Till here everything is perfect.
I have a project in CitectScada and i have no idea how to configure it to connect to Unity Pro. I go to Express I/o setup and the option Are Create a new I/o Server, next create a new I/o Device, after select the type of I/O so u basically have an idea.
If somebody could help i would be extremely thankfull.
Regards