tarik1978
Member
Which software and cable to connect to plc omron sysmac c200h cpu01 ?
Thanks
Thanks
Last edited:
Sysmac C200H CPU01
- Thread starter tarik1978
- Start date
gtsuport
Member
Software would be CX-Programmer.
C200H requires a host link unit.
There are two types, one would go into an open IO slot.
The other mounts to the 40 pin connector on the front of the CPU.
Host link units are no longer available from Omron.
You will need to look on ebay.
Cable is a standard null modem.
gtsuport.
C200H requires a host link unit.
There are two types, one would go into an open IO slot.
The other mounts to the 40 pin connector on the front of the CPU.
Host link units are no longer available from Omron.
You will need to look on ebay.
Cable is a standard null modem.
gtsuport.
gtsuport
Member
No, that cable can damage the peripheral port.
Even the Omron CQM1-CIF02 can damage the port.
You need a host link unit.
gtsuport
Even the Omron CQM1-CIF02 can damage the port.
You need a host link unit.
gtsuport
I'm sure you can use the older syswin software on the 200H.
I cannot remember the cable but I do remember it was just a 232 to some weird connector, never opened it but it seemed too small to have any converter on it.
I seem to remember a host link that fitted on the CPU 3G2A6-LK201E
but I thought this was for the C20-500 plc's.
Seem to remember there was a cable called C200H CN222
I cannot remember the cable but I do remember it was just a 232 to some weird connector, never opened it but it seemed too small to have any converter on it.
I seem to remember a host link that fitted on the CPU 3G2A6-LK201E
but I thought this was for the C20-500 plc's.
Seem to remember there was a cable called C200H CN222
Last edited:
gtsuport
Member
Yes, Syswin will work on the C200H.
3G2A6-LK201 is the CPU mount host link.
C200H-LK201 is the rack mount host link.
Cable for either is a standard null modem cable.
Semi-universal cable diagram is attached.
gtsuport
3G2A6-LK201 is the CPU mount host link.
C200H-LK201 is the rack mount host link.
Cable for either is a standard null modem cable.
Semi-universal cable diagram is attached.
gtsuport
I seem to remember using a cable like this on a C200H (cannot remember if it was a "X" model though I don't think so
https://www.bing.com/images/search?...ndex=0&idpp=overlayview&ajaxhist=0&ajaxserp=0
https://www.bing.com/images/search?...ndex=0&idpp=overlayview&ajaxhist=0&ajaxserp=0
gtsuport
Member
That is the cable for the C200H-PRO27 handheld programmer.
This is a single element handheld unit.
That takes me back!
gtsuport
This is a single element handheld unit.
That takes me back!
gtsuport
IO_Rack
Member
Two additional notes:
Pay attention to the Host Link unit you get. It comes in RS232C (DB25) and RS422 (DE9). Both will work on the PLC but you'll need the appropriate hardware on the PC side.
I noticed you have a module next to the CPU. You'll either need to remove the connectors on the module or use a stand off adapter for the Host Link Unit to mount flush. Part number is BP001 or BP002, Pro-Con Base.
Pay attention to the Host Link unit you get. It comes in RS232C (DB25) and RS422 (DE9). Both will work on the PLC but you'll need the appropriate hardware on the PC side.
I noticed you have a module next to the CPU. You'll either need to remove the connectors on the module or use a stand off adapter for the Host Link Unit to mount flush. Part number is BP001 or BP002, Pro-Con Base.
Similar Topics
Our machines plc's are obsoleted. I cant get the programming cable to backup my plc. Pls help ,if any alternative cable or circuit available for...
how do i clear this alarm? i've changed the battery today, but i dont know how to clear the alarm.
thanks for your help.
hi i need lss software for c200h and user manual for lss and c200h tanx
We're having extreme difficulties getting the PLC to recognize the High Density Output Module (C200H-OD218). We're using SysWin 3.4 for...
Hi,
I have been trying to run drive via Sysmac studio. I can ping the drive. I can see the logic bits going on/off as per command. But, drive is...