esamuelson
Member
Here is the deal, we wish to access a PLC network completely separately from the existing network it uses. The PLC network consists of a main controllogix hub with ethernet card, a SLC 5/05 and a Micrologix 1100 all connected via fiber ethernet.
I want to get another ethernet card for the controllogix and plug that into a separate, unrelated network so a different PC can access the controllogix PLC without touching the main network.
Here is my question, is it possible to set up an I/O path (through RSLinx or kepware or some IO server) that will allow me to access tags on the SLC and ML1100?
(PC -> New Network Card -> Controllogix -> Old Network Card -> SLC/ML1100)
Thanks.
I want to get another ethernet card for the controllogix and plug that into a separate, unrelated network so a different PC can access the controllogix PLC without touching the main network.
Here is my question, is it possible to set up an I/O path (through RSLinx or kepware or some IO server) that will allow me to access tags on the SLC and ML1100?
(PC -> New Network Card -> Controllogix -> Old Network Card -> SLC/ML1100)
Thanks.