AS-i device configurator

Is it the one that looks like a DMM with display at top and a rotary switch in the middle and a M12 socket at the bottom, the 3RK1904-2AB01 ?

It looks like I can plug in a single device, program (set up) it's address, look at its state, not needing an external power supply.
 
Yes, that's a good one.

You can do everything that you stated with it. You can connect up to a slave without it being powered up and change the node address and view the configuration.

If the node is on an active network, you can view its status, ....
 
I found the Siemens one to be garbage, threw mine in the bin and bought a Gossen Metratest 36A. Not sure mine is still a current model. I had trouble with the siemens unit that it wouldnt power some of the nodes i was commissioning however the gossen unit worked a treat, also has software (WinProfi) to save the commisioning data for the network etc etc

Heres the spec sheet for the 36A which i also found far superior and easier to use than the Siemens one, there was a bit of a difference in price though !!
 
Last edited:
We did a few ASI bus systems. You do get a hand held ASI configurator. Never been tested, to my knowledge, so I would not trust it. Why ASI bus, not very integratable with major role players.
 
ASI bus is not a Siemens product. It is a a 3rd party involvement. Unless fully integrated by the OEM. Any one of the current OEM's.
 

Similar Topics

T
Emerson AMS Device Configurator will not recognize Viator modem?
I purchased a Viator HM-PF-USB-POWERX HART modem specifically because I was told it worked with Emerson AMS Device Configurator. But, Device...
Replies
0
Views
474
timothy585
T
A
Device net configurator
Hi. Does any one have the cable details ie pin to pin for an Allen Bradley 2702-DNC. It is a devicenet configurator that uses a common port to...
Replies
3
Views
4,486
MHennel
M
R
Unable to import capability file for FF device in ABB Freelance engineering tool
Recently we have purchased the Rosemount 752 remote indicator to replace with new one, Capability file for that FF Device is unable to import with...
Replies
0
Views
21
Rehanuldhanveer
R
R
Omron device net fault
Good morning everyone I’m currently working on a omron device net and have a nord drive that fell off the network. I have limit knowledge in...
Replies
2
Views
98
alan_505
A
T
Device Net MCC
Anyone have a idea of what would cause a failure of all nodes (buckets) of an AB Device Net MCC upon a power cycle of the main feeder for that MCC?
2
Replies
17
Views
754
Tim Ganz
T
Back
Top Bottom