Hi all,
I am trying to get a Siemens 315-2 PNDP PLC and a Siemens ET200M (153-4) Profinet system to communicate to each other over wifi (I am using a MOXA AWK-3121-US wireless switch. however I am having a difficult time getting it to work. I can ping to each devices ip address. but when i view the siemens hardware config, it says the IM153-4 is configured but not available. If i connect directly to the PLC and the IM153-4 with a CAT5 cable, it will communicate just fine.
Is there some setting that I am missing?
any helpful remedies are welcomed.
Thank you
I am trying to get a Siemens 315-2 PNDP PLC and a Siemens ET200M (153-4) Profinet system to communicate to each other over wifi (I am using a MOXA AWK-3121-US wireless switch. however I am having a difficult time getting it to work. I can ping to each devices ip address. but when i view the siemens hardware config, it says the IM153-4 is configured but not available. If i connect directly to the PLC and the IM153-4 with a CAT5 cable, it will communicate just fine.
Is there some setting that I am missing?
any helpful remedies are welcomed.
Thank you