You are not registered yet. Please click here to register!

plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!

Go Back - Interactive Q & A > - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Thread Tools Display Modes
Old July 18th, 2003, 01:43 AM   #1

BarryP is offline
Join Date: Jul 2003
Location: Perth Western Australia
Posts: 5
Question GE Fanuc Versamax HSC ComReqs

Has anyone any examples of using the Comreqs of this PLC for changing the value of a B Type HSC to zero on command, e.g. when %M100 goes high.

The PLC is a IC200UAL006-AA version & I am using Versapro Vs2.01.

I already have the manual on this unit but the write-up is very inexplicit and a bit wishy washy.

Thanx in anticipation
  Reply With Quote
Old July 18th, 2003, 02:22 AM   #2
Lifetime Supporting Member

BobB is offline
BobB's Avatar
Join Date: Jun 2002
Location: Sydney
Posts: 4,326

Have you checked the GE-Fanuc website and done a search? I have found some excellent examples there for other things before.
  Reply With Quote
Old July 18th, 2003, 05:29 AM   #3
Steve Bailey
Lifetime Supporting Member + Moderator
United States

Steve Bailey is offline
Steve Bailey's Avatar
Join Date: Apr 2002
Location: The boondocks of Western Massachusetts USA
Posts: 6,805
In the example on page 12-18 of GFK-1645C, for your case, the value at IN4 of the second Block Move instructon should be 0101(hex) and the value at IN5 should be zero.

If you use different %R registers than the example, the value at IN3 will need to change. It represents the the address offset of the register that contains the command word. In the example, that register is %R111, thus the value 006E (hex), or 110 (dec).
  Reply With Quote
Jump to Live PLC Question and Answer Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
GE Fanuc VersaMax Easy Program Store Device CaseyK LIVE PLC Questions And Answers 2 September 13th, 2004 06:38 PM
GE Fanuc VersaMax PID control problem Shawn Cassidy LIVE PLC Questions And Answers 6 May 16th, 2004 08:10 AM
GE Fanuc HMI Development Phil Bugg LIVE PLC Questions And Answers 2 December 11th, 2003 09:58 AM
Communications for GE Fanuc versamax and 90-30/70 modules for Remote I/O's nagub4u LIVE PLC Questions And Answers 1 September 26th, 2003 06:45 AM
GE Fanuc 90-30 HSC as oscillator rsdoran LIVE PLC Questions And Answers 11 October 19th, 2002 08:01 AM

All times are GMT -5. The time now is 04:44 AM.