Hey new to the forum, appreciate you doing what you do!
I have a MicroLogix 1000 on the floor at our plant. What's happening intermittently (every few days) is that it'll fault with
"Major Error Halt S:1/13" = 1
and also
"Retentive Data Lost S:5/8" = 1
I can not clear this fault without actually setting the values to 0 and am unsure which fault is the real culprit.
I have a MicroLogix 1000 on the floor at our plant. What's happening intermittently (every few days) is that it'll fault with
"Major Error Halt S:1/13" = 1
and also
"Retentive Data Lost S:5/8" = 1
I can not clear this fault without actually setting the values to 0 and am unsure which fault is the real culprit.