jgarrido28
Member
Hi friends
I have problems with the 1761 NET ENI /D i can´t comunicate with the plc 1500 AB in a SCADA that have the PLC, the ENI, a Swith and a Panel View 1000.
The configuration of the ENI (conected to Switch)
Ip 192.168.190.187
Subnet mask 255.255.255.0
gateway 0.0.0.0
232 Baud rate port Serial to plc 19000 Baud
Bootp (Unchecked)
Ethernet Speed / Duplex (Auto negotiate)
The configuration of my PC (Conected to switch)
IP 192.168.190.186
Subnet mask 255.255.255.0
gateway 0.0.0.0
Configuration of Panel View (conected to Switch)
Ip 192.168.190.188
Subnet mask 255.255.255.0
gateway 0.0.0.0
SCADA work properly in another company but when we settled appear communication error between the panel view and plc.
I begin with traying a PING since my pc to a ENI (192.168.190.187) but does not respond. performed PING to PANEL VIEW (192.168.190.188) and it responds.
netx i do commad ARP -a and the PANEL VIEW with its MAC and IP Apear but the ENI no.
That may be happening with ENI?
I see tha the LINK led in the ENI when finish the restar Hold on without a cable conected. The ENI don´t show Fault
Thak you
Jorge
I have problems with the 1761 NET ENI /D i can´t comunicate with the plc 1500 AB in a SCADA that have the PLC, the ENI, a Swith and a Panel View 1000.
The configuration of the ENI (conected to Switch)
Ip 192.168.190.187
Subnet mask 255.255.255.0
gateway 0.0.0.0
232 Baud rate port Serial to plc 19000 Baud
Bootp (Unchecked)
Ethernet Speed / Duplex (Auto negotiate)
The configuration of my PC (Conected to switch)
IP 192.168.190.186
Subnet mask 255.255.255.0
gateway 0.0.0.0
Configuration of Panel View (conected to Switch)
Ip 192.168.190.188
Subnet mask 255.255.255.0
gateway 0.0.0.0
SCADA work properly in another company but when we settled appear communication error between the panel view and plc.
I begin with traying a PING since my pc to a ENI (192.168.190.187) but does not respond. performed PING to PANEL VIEW (192.168.190.188) and it responds.
netx i do commad ARP -a and the PANEL VIEW with its MAC and IP Apear but the ENI no.
That may be happening with ENI?
I see tha the LINK led in the ENI when finish the restar Hold on without a cable conected. The ENI don´t show Fault
Thak you
Jorge