mitakka Member M Join Date Mar 2017 Location SZ Posts 14 Mar 29, 2017 #1 Have you configured the PID manually or use autotuning? http://mitakka369.blogspot.bg/2017/03/how-autotuning-of-pid-is-done.html
Have you configured the PID manually or use autotuning? http://mitakka369.blogspot.bg/2017/03/how-autotuning-of-pid-is-done.html
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Mar 29, 2017 #2 Autotuning is the most common. Sometimes this may take a while depending on your system process. It usually will take at least one cycle above and below the set point to adjust the PID parameters correctly.
Autotuning is the most common. Sometimes this may take a while depending on your system process. It usually will take at least one cycle above and below the set point to adjust the PID parameters correctly.
mitakka Member OP M Join Date Mar 2017 Location SZ Posts 14 Mar 29, 2017 #3 How Autotuning of PID is done? Thanks for the shared knowledge, friend! :site: