jimcav Member J Join Date Dec 2004 Location new jersey Posts 229 Feb 11, 2019 #1 can some please tell me if there is a parameter to settle down the MoveStatus bit. its toggling on and off even if the motor is not moving. need help asap Thanks
can some please tell me if there is a parameter to settle down the MoveStatus bit. its toggling on and off even if the motor is not moving. need help asap Thanks
Ken Roach Lifetime Supporting Member + Moderator Join Date Apr 2002 Location Seattle, WA Posts 17,480 Feb 11, 2019 #2 The .MoveStatus bit is like that; any motor that's holding position is going to flicker the bit on and off as it makes tiny adjustments. Look at the Velocity Standstill Status and the Velocity Standstill Status Window instead. That gives you a "zero speed" indication with an adjustable window that is a better representation of "the axis is not in motion".
The .MoveStatus bit is like that; any motor that's holding position is going to flicker the bit on and off as it makes tiny adjustments. Look at the Velocity Standstill Status and the Velocity Standstill Status Window instead. That gives you a "zero speed" indication with an adjustable window that is a better representation of "the axis is not in motion".