lauwerstim
Member
I'm having a little problem configuring my WinCC project.
I have a Profibus network with 1 master and 8 slaves (each PLC with alarm_S data), now I can get the master PLC connected to the WinCC but the slaves won't connect.
When I compile the OS it says that I havn't configured a network connection for the slave PLC's, but they already communicate with the master, so the network is fine.
Any ideas on how to get this fixed?
I have a Profibus network with 1 master and 8 slaves (each PLC with alarm_S data), now I can get the master PLC connected to the WinCC but the slaves won't connect.
When I compile the OS it says that I havn't configured a network connection for the slave PLC's, but they already communicate with the master, so the network is fine.
Any ideas on how to get this fixed?