Paradigm1999
Member
Hi,
I am using Siemens S7-300 PLC and a Comfort panel HMI. I had 2 pages on my HMI. One is the Overview page and the other is the automatic page.
I had a selector switch connected to DI0 and DI1 of my PLC. I wanted to change the page of the HMI when the selector switch is changed. When DI0 set and DI1 reset, Overview page comes out. When DI0 reset and DI1 set, change to Automatic page on the HMI.
Can someone tell me what function or logic I can used to command the HMI to change page when DI0 or DI1 is set. Thanks a lot for your help
I am using Siemens S7-300 PLC and a Comfort panel HMI. I had 2 pages on my HMI. One is the Overview page and the other is the automatic page.
I had a selector switch connected to DI0 and DI1 of my PLC. I wanted to change the page of the HMI when the selector switch is changed. When DI0 set and DI1 reset, Overview page comes out. When DI0 reset and DI1 set, change to Automatic page on the HMI.
Can someone tell me what function or logic I can used to command the HMI to change page when DI0 or DI1 is set. Thanks a lot for your help