Hi Everyone
I had to replace an HMI & the project Intouch 7.11 was converted to Intouch 2014 R2 SP1 version. The PLC is TSX Premium.
Installed the Intouch 2014 & DAServer & Configured. The problem is that there is no communication with the PLC. It was observed that the Device Group in the diagnostics is not found.
Else the Access Names is configured as for Access Name (checked in Windowmaker & Tag Dictionary). The pictures of the SMC & Access Name could be viewed on the web address below..
Any help in regard to the PLC communication with the Intouch would be much appreciated.
https://ibb.co/d2ZDMbh
https://ibb.co/xLzm4My
https://ibb.co/QkrbMVM
https://ibb.co/XJQkk7t
https://ibb.co/8j7DVpV
Thanks in advance.
I had to replace an HMI & the project Intouch 7.11 was converted to Intouch 2014 R2 SP1 version. The PLC is TSX Premium.
Installed the Intouch 2014 & DAServer & Configured. The problem is that there is no communication with the PLC. It was observed that the Device Group in the diagnostics is not found.
Else the Access Names is configured as for Access Name (checked in Windowmaker & Tag Dictionary). The pictures of the SMC & Access Name could be viewed on the web address below..
Any help in regard to the PLC communication with the Intouch would be much appreciated.
https://ibb.co/d2ZDMbh
https://ibb.co/xLzm4My
https://ibb.co/QkrbMVM
https://ibb.co/XJQkk7t
https://ibb.co/8j7DVpV
Thanks in advance.