Cow
Member
Does anyone have any recommendations for a good reasonably priced 4-20mA transducer I can use with a VFD running a PID loop on a wastewater line? The system is using a softstart right now, but it's over pressurizing the line. So whatever kind of transducer I come up with will most likely get something welded onto the steel line to mount it. It's a blank slate right now for mounting options.
I've done quite a few constant pressure water systems, but haven't done a constant pressure wastewater system yet.
I'd probably be looking for 0-250 psi or so to have a little buffer in there. I think it'll end up running around 75-150 psi when it's done.
Thanks.
I've done quite a few constant pressure water systems, but haven't done a constant pressure wastewater system yet.
I'd probably be looking for 0-250 psi or so to have a little buffer in there. I think it'll end up running around 75-150 psi when it's done.
Thanks.