Siemens second HMI Step 7 5.5 + Portal V14

RMcNaughton

Member
R
Join Date
Nov 2017
Location
Dunfermline
Posts
2
I am wondering if anyone has set up a second siemens HMI using portal (V14) to a PLC programmed in step 7 5.5. I have attempted to do this using a proxy PLC in Portal V14 but I cannot get the HMI to communicate with the PLC. I have previously replaced an old HMI that was broken with a new one using a proxy PLC in portal and it worked fine but this was just a copy of the original. This time i want to add a totally new HMI to the system. Does anyone have any experience with this?
 

Similar Topics

R
Second Siemens HMI
I am wondering if anyone has set up a second siemens HMI using portal (V14) to a PLC programmed in step 7 5.5. I have attempted to do this using a...
Replies
5
Views
2,307
Lare
L
Lamboom
Creating a second LAN configuration for Siemens
Hi This is about making another wired LAN connection configuration. Ya know when you go to control panel/Network and Internet/network and Sharing...
2
Replies
25
Views
9,079
NetNathan
N
L
Siemens S7 224 Program Help Requested {SECOND REQUEST}
Hello everyone. On December 17th, I submitted a pdf (zipped) file of a program using Siemens S7-224. Has anyone taken on the task of looking at...
Replies
0
Views
6,766
ltrail
L
H
Siemens CPU 317-2DP Firmware Version V2.1.8
Hello, I have a CPU 317-2DP Firmware Version V2.1.8. In TIA Portal only V2.6 is available, and there is no option to upgrade FW. Then I open it...
Replies
2
Views
97
hafizzz_ahmad
H
J
Siemens PLC Help
HI everyone, i am new to Siemens plc programming and i am in need of some help. yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Replies
9
Views
297
mk42
M
Back
Top Bottom