coda9753
Member
I have an exsisitng SLC 5/03 - Quick panel system that is working. I would like to integrate all this into a DH485 network. But the exsisitng quick panel is connect directly to the SLC 485 port. If i install an AIC, connecting the SLC to the bottom connector, and wire up the Trunk line though the top, could the quick panel connect throught the AIC's center connection normally used for the PIC?
Otherwise i'm wondering if i need a seperate AIC just for the Quick panel, cause it's a node on the network.
Otherwise i'm wondering if i need a seperate AIC just for the Quick panel, cause it's a node on the network.