JeremyM
Lifetime Supporting Member
(or industry alarming in general)
Hi all,
I’m working to implement (in C++, in a more or less platform-agnostic way) Alarm/Event detection, handling, and so on and started teasing the problem by modeling my solution after the Rockwell ALMD/ALMA objects. On that path, my most pressing curiosity I have would be why there’s a distinction between ‘Operator’ and ‘Program’ when it comes to alarm acknowledgement, shelving, suppression, and so on. If the end result is the same, are the ostensibly redundant parameters just that?
I tried my best at Googling this one. Thanks for the help!
Hi all,
I’m working to implement (in C++, in a more or less platform-agnostic way) Alarm/Event detection, handling, and so on and started teasing the problem by modeling my solution after the Rockwell ALMD/ALMA objects. On that path, my most pressing curiosity I have would be why there’s a distinction between ‘Operator’ and ‘Program’ when it comes to alarm acknowledgement, shelving, suppression, and so on. If the end result is the same, are the ostensibly redundant parameters just that?
I tried my best at Googling this one. Thanks for the help!
Last edited: