I have a 313-6CF03-0AB0 V 2.6.9 Connected to a 343-1GX30-0XEO V 1.2
First question Are they compatible? I looked it up on Siemens Website and the CPU is not listed?
http://support.automation.siemens.c...objaction=csview&extranet=standard&viewreg=WW
Second question I'm not really understanding the FC5 and FC6 in the manual page # 193
http://support.automation.siemens.c...slib.csinfo&lang=en&objid=8777865&caller=view
do I just make the same stl then call fc5 or fc50? am I understanding that correctly?
First question Are they compatible? I looked it up on Siemens Website and the CPU is not listed?
http://support.automation.siemens.c...objaction=csview&extranet=standard&viewreg=WW
Second question I'm not really understanding the FC5 and FC6 in the manual page # 193
http://support.automation.siemens.c...slib.csinfo&lang=en&objid=8777865&caller=view
do I just make the same stl then call fc5 or fc50? am I understanding that correctly?