mjisaacs
Member
I am in the middle of a project, and the proverbial kink just got thrown in on me. I am replacing an existing weight batching system with a PLC and a weighing module for the slc series. All seems ok, but I just was just informed that the H**IC is expecting the system to print batch sheets that are at least similar to the ones that the old velcon system printed out, using a serial line from the system to a PC and printer. The system has already been torn out, so I can't turn back. But i also can't commission my system until I can print. I have done a lot of things with a SLC, but printing is not one of them. I know you don't need all the details, but for your info, I am running a 7 slot rack, a hardy WS card (for weight), a 32 point DC in, a 32 point DC out, a 2 in 2 out analog v card (to control drive speeds), and the MAC DADDY of all SLC's, the 1747-L553 processor. I am using a 2711-B5A20 Panelview, and an industrial hub to tie it all together with ethernet. I am not using the com port on the PV or the processor. Any help or suggestions with how to print would be greatly appreciated.