CHAD
Member
I am familiar with RSLogix 500 and I have done multiple applications using analog. I have to do a project using Direct Soft 32. I am going to use an Automation Direct DL05 4-20ma input module to monitor water pressure from a 4-20ma 0-100psi pressure transducer. I want to scale the 4-20ma signal down to 0-100. This will be my pressure to be displayed on my OIT and I will also use it for some comparisons to start pumps. I have used an SCP function with RSlogix 500 before to do this but am unsure how to do it with my DL05 plc. Any input would be appreciated.