Hi guys
i'm newbe to FTV Studio and so i ask again your help! Two questions; the first: on plc i have an array for the alarms messages tag name = ALM type BOOL[1024[. Is better write 1024 alarm tags on FTV Studio or try to copy (on PLC) ALM bits array to DINT array and then use the DINT variables on FTV? If the second way is the best solution, what is the sintax on FTV --> alarm Setup --> Triggers for understand what bit is set (i.e. ALAM_DINT[0] && 2#1 for the bit zero ad so on ....)?
Second question: i need to manage two separate message category: alarms and service messages (for maintenance). Is possible make 2 differnt list for each category (like Alarm list object but also for service messages).
Thank you so much.
i'm newbe to FTV Studio and so i ask again your help! Two questions; the first: on plc i have an array for the alarms messages tag name = ALM type BOOL[1024[. Is better write 1024 alarm tags on FTV Studio or try to copy (on PLC) ALM bits array to DINT array and then use the DINT variables on FTV? If the second way is the best solution, what is the sintax on FTV --> alarm Setup --> Triggers for understand what bit is set (i.e. ALAM_DINT[0] && 2#1 for the bit zero ad so on ....)?
Second question: i need to manage two separate message category: alarms and service messages (for maintenance). Is possible make 2 differnt list for each category (like Alarm list object but also for service messages).
Thank you so much.