sthays10
Member
Hi All,
Our FT View ME application has 2 PV+ 1000's and a SLC-5/05 processor. One of the PVs will be used as a remote viewing terminal, one will be used as the control terminal. I want to eliminate the ability to start the pumps from the remote terminal.
My first thought was to password protect the terminal, which I will do anyway, and make the visibility of the start button restricted to access level A. The problem with this is the operators will who will start the pumps at the pump house will also be the ones viewing the remote terminal.
Is there any way I can assign visibility to an IP address or node number, or any way I can send part or all of the IP address of the HMI terminal back to the PLC to set a visibility bit?
Any help is appreciated - thanks for taking the time to look at this.
Steve
Our FT View ME application has 2 PV+ 1000's and a SLC-5/05 processor. One of the PVs will be used as a remote viewing terminal, one will be used as the control terminal. I want to eliminate the ability to start the pumps from the remote terminal.
My first thought was to password protect the terminal, which I will do anyway, and make the visibility of the start button restricted to access level A. The problem with this is the operators will who will start the pumps at the pump house will also be the ones viewing the remote terminal.
Is there any way I can assign visibility to an IP address or node number, or any way I can send part or all of the IP address of the HMI terminal back to the PLC to set a visibility bit?
Any help is appreciated - thanks for taking the time to look at this.
Steve