busarider29
Lifetime Supporting Member
Greetings from Michigan,
I want to use a PowerFlex 755 drive with a Beckhoff controller. The drive has a "PowerFlex 20-750-ENETR Dual-port Ethernet/IP module" on it. I plan to use that and communicate with it over ENet-IP. What EDS file/s do I require and is there one available, either for the drive, the module, or both? I found EDS file for PowerFlex 755 drive on the Rockwell website, but the link to download it says "PowerFlex 755 drive with Embedded Ethernet IP". The drive I am using obviously does not have Ethernet IP embedded.
Thanks,
D
I want to use a PowerFlex 755 drive with a Beckhoff controller. The drive has a "PowerFlex 20-750-ENETR Dual-port Ethernet/IP module" on it. I plan to use that and communicate with it over ENet-IP. What EDS file/s do I require and is there one available, either for the drive, the module, or both? I found EDS file for PowerFlex 755 drive on the Rockwell website, but the link to download it says "PowerFlex 755 drive with Embedded Ethernet IP". The drive I am using obviously does not have Ethernet IP embedded.
Thanks,
D