Not a PLC question. But we are looking for a good electrical contractor in the Lakeland, Fl. area. If some of you have information on a good one, please let me know. We have a project there that will take about 2 months. Not sure of the dates at this time, but should be in the next 4 to 5 months. It will be a NEMA 4 project, we will furnish all materials just need wire duct hung, conduit ran and wire pulled / terminated as per prints. We will have an Engineer onsite at all times to help.
Thanks
Alan Akers
Alabama Automation & Service
e-mail: [email protected]
Thanks
Alan Akers
Alabama Automation & Service
e-mail: [email protected]