Ken Moore
Lifetime Supporting Member
Hi folks,
I have encountered two different plants (Both having Siemens PCS-7 control systems) where the tags/symbols for the Equipment was different from what I'm used to, but they both used the same "standard". One had ties to Spain, and the other Germany.
Example:
Pump tags start with "GA", such as GA-100.
Mixers start with GD, ...GD-101
Reactors: DC-103
Tanks, some are FA, some are FB, not sure what the difference is.
FA-104 or FB-105
If anyone is familiar with these, can you point me to a reference for them?
I have encountered two different plants (Both having Siemens PCS-7 control systems) where the tags/symbols for the Equipment was different from what I'm used to, but they both used the same "standard". One had ties to Spain, and the other Germany.
Example:
Pump tags start with "GA", such as GA-100.
Mixers start with GD, ...GD-101
Reactors: DC-103
Tanks, some are FA, some are FB, not sure what the difference is.
FA-104 or FB-105
If anyone is familiar with these, can you point me to a reference for them?