hello !
at work we use FC 0 to force inputs
example M0.1 -= I 100.0
M0.1 is always logical 1
question : is there a possibility to check the real state of the input in S7 while it's forced or is it necessary to check hardware
btw does the led at the inputcard lights up if you force an input ? didn't check that actually
hoop my question is clear cause my english is poor -
Greats DeHulk
at work we use FC 0 to force inputs
example M0.1 -= I 100.0
M0.1 is always logical 1
question : is there a possibility to check the real state of the input in S7 while it's forced or is it necessary to check hardware
btw does the led at the inputcard lights up if you force an input ? didn't check that actually
hoop my question is clear cause my english is poor -
Greats DeHulk