Kataeb
Member
i am starting a tia portal v13 sp1 new project, with s71500 cpu + local modules, and also some et200sp stations + their own modules.
after doing the devices configuration, i found that i need to add more digital input and output modules. but this resulted in having the io addresses no longer consecutive from one module to another.
i need to shift the io address of the previously inserted modules, so the io address of the new modules will be in the correct order as their neighboring ones.
is there any way to realign the io addresses in the whole project? to have them consecutive again? with increasing address value from module to module and from station to station?
is this possible to do easily?
thank you
after doing the devices configuration, i found that i need to add more digital input and output modules. but this resulted in having the io addresses no longer consecutive from one module to another.
i need to shift the io address of the previously inserted modules, so the io address of the new modules will be in the correct order as their neighboring ones.
is there any way to realign the io addresses in the whole project? to have them consecutive again? with increasing address value from module to module and from station to station?
is this possible to do easily?
thank you