GSV Equivalent for new CompactLogix 5069-IO

skyfox

Lifetime Supporting Member
S
Join Date
Nov 2006
Location
CA
Posts
279
I used GSV to get the current status of older 1769 I/O modules. What is the equivalent for new 5069-I/O ? I know individual points/channels have fault statuses. I want to know if the module as a whole is active or faulted. Any way to do this? I also don't want to inhibit the module.

Thanks.
 

Similar Topics

D
GSV instruction
I'm trying to dig to the source of a minor "recoverable" system fault throwing a fault light on a machine that has been confusing my operator...
Replies
3
Views
74
drbitboy
drbitboy
F
GSV does nothing
So, I'm really just trying to get some experience by practicing with arrays. I'm using studio 5000 v33. I have one rung with an XIC bit that's...
Replies
5
Views
229
Culliham
C
A
GSV Effects on PLC Performance
Hello all, I know in the past it's been the case that we wanted to limit the total number of GSV calls per scan of the PLC. Is that still the...
Replies
2
Views
660
A_G
A
L
GSV module status of EN2TR in secondary chassis.
Hello, I have a question regarding the status checking of the module in the secondary chassis in a redundancy setup. CHASSIS 1 ...
Replies
6
Views
1,129
JeremyM
JeremyM
L
Control Logix GSV for Power Supply Status
Hello Members We have a controllogix redundancy setup and need to display the status of redundancy in panelview. I have found in the manual the...
Replies
8
Views
1,254
lijochrn
L
Back
Top Bottom