Dear SIR,
In one of the scenario's, I have to control VFD Frequency (4-20 mA) , with Oxygen Analyser. (4-20 mA).
I have Configured PID Parameters as such.
Please check whether PID parameters are configured properly or not.
I have used SLC 5/03 and RSview32.
Generally in PID , CV is used for controlling Analog O/P , But in my case i have used Scaled ERROR word for controlling.
I dont know whether it's correct or not.
It's my first time tuning a PID loop.
Please Apologise if any mistakes or error .
Thank you.
In one of the scenario's, I have to control VFD Frequency (4-20 mA) , with Oxygen Analyser. (4-20 mA).
I have Configured PID Parameters as such.
Please check whether PID parameters are configured properly or not.
I have used SLC 5/03 and RSview32.
Generally in PID , CV is used for controlling Analog O/P , But in my case i have used Scaled ERROR word for controlling.
I dont know whether it's correct or not.
It's my first time tuning a PID loop.
Please Apologise if any mistakes or error .
Thank you.