Hello, I have a powerflex 525 to setup the dynamic break for a motor. Currently the powerflex 525 setup are:
45 - 8 (Ramp + EM B, CF)
46 - 5 (Eth/IP)
47 - 15 (Eth/IP)
69 - 15 (EM Brk Cntr)
76 - 29 (Safe-Off)
86 - EM Brk Off Delay - 0.1s
87 - EM Brk On Delay - 0.1s
Should I use Opto Out1 Sel for the break control or Relay Out1 Sel? Thank you.
45 - 8 (Ramp + EM B, CF)
46 - 5 (Eth/IP)
47 - 15 (Eth/IP)
69 - 15 (EM Brk Cntr)
76 - 29 (Safe-Off)
86 - EM Brk Off Delay - 0.1s
87 - EM Brk On Delay - 0.1s
Should I use Opto Out1 Sel for the break control or Relay Out1 Sel? Thank you.