Hello.
I am using the following:
Eaton E4-AC-12RXP PLC
I am trying to control the CL86T which controls a Closed-Loop Stepper motor.
I am using Eaton Easysoft 8.0 on firmware 1.4.
I tried to program the plc using Ladder Logic.
This is the link that all the necessary files to program this.
https://www.dropbox.com/scl/fo/s2sgngxe0i4lr977lxbfl/h?dl=0&rlkey=jfoppce7jf73cqbd2jgv9kyjb
it has the electrical schematic, a couple programs that I have made on the eaysoft software and some user manuals of the cl86T.
My overall goal is just to control the stepper motor in a clockwise and counterclockwise fashion.
Any help would greatly be appreciated.
Thanks,
Christian
I am using the following:
Eaton E4-AC-12RXP PLC
I am trying to control the CL86T which controls a Closed-Loop Stepper motor.
I am using Eaton Easysoft 8.0 on firmware 1.4.
I tried to program the plc using Ladder Logic.
This is the link that all the necessary files to program this.
https://www.dropbox.com/scl/fo/s2sgngxe0i4lr977lxbfl/h?dl=0&rlkey=jfoppce7jf73cqbd2jgv9kyjb
it has the electrical schematic, a couple programs that I have made on the eaysoft software and some user manuals of the cl86T.
My overall goal is just to control the stepper motor in a clockwise and counterclockwise fashion.
Any help would greatly be appreciated.
Thanks,
Christian