f16bmathis
Member
Trying to go online with a 5/05 using RS Linx Lite, with either a rs242 9 pin din? cable or the other round one that's on top of that one.
Comms set to proper com port (2, I checked) and set to proper driver (sorry I'm not looking at it and can't remember the exact wording), and go to auto detect? The comm port is good, but it can not configure automatically.
There is a servo driver connected to the RS-242 9 pin din port, and nothing to the round connector. I tried both connectors with the respective cables, and am wondering why it won't automatically configure. I also tried my own set of cables with same effect.
So... If you can decipher what I'm trying to say above, is it that somehow the comms are set so they aren't going to connect the normal way, or am I doing something wrong? Did not find an Ethernet connection.
Thanks!
Comms set to proper com port (2, I checked) and set to proper driver (sorry I'm not looking at it and can't remember the exact wording), and go to auto detect? The comm port is good, but it can not configure automatically.
There is a servo driver connected to the RS-242 9 pin din port, and nothing to the round connector. I tried both connectors with the respective cables, and am wondering why it won't automatically configure. I also tried my own set of cables with same effect.
So... If you can decipher what I'm trying to say above, is it that somehow the comms are set so they aren't going to connect the normal way, or am I doing something wrong? Did not find an Ethernet connection.
Thanks!