KingPresident
Member
First time I've encountered this; a fellow controls guy here compiled the project into a .mer and downloaded the project. The panelview plus 7 challenged with a communications driver error. It prompted me with a 'Load anyway?' yes/no screen. I pressed 'no', and it kicked me out to the terminal menu. I reset the terminal and it again had the comms driver error. This time I pressed 'yes' just to see what would happen, and the project loaded and works just fine. I'm ok with the fact that it works, but not ok that I didn't solve the actual problem. Does anyone have an Idea? I confirmed setting in RSLinx Enterprise, and the Communications tab.
Would upgrading the firmware be the thing to do? Thanks.
Would upgrading the firmware be the thing to do? Thanks.