[FONT="]Hi,[/FONT]
[FONT="]I created a program and compiled it with no errors, changed the program hardware configuration to match the plc.[/FONT]
[FONT="]If I try to connect I get the error, no idea what I'm doing wrong.[/FONT]
[FONT="]I repeately get this error:[/FONT]
Communications error. Check the Modbus Driver parameters, controller connections or powersuply
[FONT="]I'm running win 10 64bit[/FONT]
[FONT="]Twidosuite 2.20.11 (fresh install and registered)[/FONT]
[FONT="]Win 64 Modbus Serial Driver V3.0[/FONT]
[FONT="]I'm connecting thru a Eminent(EM1016) usb to rs232 converter (COM7)[/FONT]
[FONT="]TFTXCP025 cable[/FONT]
[FONT="]TWDLCDA24DRF telemechanique PLC[/FONT]
[FONT="]I created a program and compiled it with no errors, changed the program hardware configuration to match the plc.[/FONT]
[FONT="]If I try to connect I get the error, no idea what I'm doing wrong.[/FONT]
[FONT="]I repeately get this error:[/FONT]
Communications error. Check the Modbus Driver parameters, controller connections or powersuply
[FONT="]I'm running win 10 64bit[/FONT]
[FONT="]Twidosuite 2.20.11 (fresh install and registered)[/FONT]
[FONT="]Win 64 Modbus Serial Driver V3.0[/FONT]
[FONT="]I'm connecting thru a Eminent(EM1016) usb to rs232 converter (COM7)[/FONT]
[FONT="]TFTXCP025 cable[/FONT]
[FONT="]TWDLCDA24DRF telemechanique PLC[/FONT]