Hello,
I am using WinCC Advanced V15 TIA (Runtime) and I want to create HMI user data type for PLC tags for third vendor PLC. WinCC RT communicate with PLC (Allen Bradley) through ETHERNET/IP driver. I found on manual that HMI UDT tags are only supported for S7-1200, S7-1500 and S7-300/S7-400.
Is possible to use faceplates and HMI UDT tags for ETHERNET/IP driver?
Appreciate your help...
Regards,
Peter
I am using WinCC Advanced V15 TIA (Runtime) and I want to create HMI user data type for PLC tags for third vendor PLC. WinCC RT communicate with PLC (Allen Bradley) through ETHERNET/IP driver. I found on manual that HMI UDT tags are only supported for S7-1200, S7-1500 and S7-300/S7-400.
Is possible to use faceplates and HMI UDT tags for ETHERNET/IP driver?
Appreciate your help...
Regards,
Peter