AivisNewBie
Member
Hello all,
I ran in to some trouble.
I created 2 virtual machines to try out ADS communicating One machine is a PLC (TC2 32bit (runtime)), other is (should be) a client (TC2 64bit engineering+ Visual studio adsAPI) that should read/write from/to PLC VM.
1. problem : TC2 64 bit engineering does not find a PLC VM. (i know it is possible to find it (https://www.reddit.com/r/PLC/comments/2mhbjh/help_connecting_twincat_211_plc_program_running/ )but mine does not find it)
2 problem: (bigger one). I can find this VM PLC from other 32bit VM with TC2 32bit, but when I try to "add route" I get ADS error 1796.
I saw one post on this forum about very similar issue(http://www.plctalk.net/qanda/showthread.php?t=89563&highlight=ADS+ERROR+1796), but could not find answer here.
Maybe someone here tried this out and could help me out?
thanks you all in advance
I ran in to some trouble.
I created 2 virtual machines to try out ADS communicating One machine is a PLC (TC2 32bit (runtime)), other is (should be) a client (TC2 64bit engineering+ Visual studio adsAPI) that should read/write from/to PLC VM.
1. problem : TC2 64 bit engineering does not find a PLC VM. (i know it is possible to find it (https://www.reddit.com/r/PLC/comments/2mhbjh/help_connecting_twincat_211_plc_program_running/ )but mine does not find it)
2 problem: (bigger one). I can find this VM PLC from other 32bit VM with TC2 32bit, but when I try to "add route" I get ADS error 1796.
I saw one post on this forum about very similar issue(http://www.plctalk.net/qanda/showthread.php?t=89563&highlight=ADS+ERROR+1796), but could not find answer here.
Maybe someone here tried this out and could help me out?
thanks you all in advance