plc_padawan
Member
- Join Date
- Oct 2004
- Posts
- 71
Hello everyone,
I'm working on a project where I'm turning a set of 6 lights on, one at a time. When you press the start button, light one turns one and then what I want to have happen, is every 5 seconds another light comes on till all 6 are on.
The problem arises when I try and use more than 2 on delay timers. For some reason, the count on those timers jumps up to over 33000, which means I have no way to turn them on and reset them. It's probably something simple, but I'm not sure where to look. Any ideas on how to solve this?
thanks
Tom
I'm working on a project where I'm turning a set of 6 lights on, one at a time. When you press the start button, light one turns one and then what I want to have happen, is every 5 seconds another light comes on till all 6 are on.
The problem arises when I try and use more than 2 on delay timers. For some reason, the count on those timers jumps up to over 33000, which means I have no way to turn them on and reset them. It's probably something simple, but I'm not sure where to look. Any ideas on how to solve this?
thanks
Tom