Flex I/O

smohamed

Member
S
Join Date
Mar 2008
Location
ON
Posts
108
Hey everyone.

Have another question, this time regarding Flex I/O. We're using a ControlLogix PLC (via Ethernet) and Flex I/O, specifically a 1794-IB10XOB6 to bring in some Inputs and Outputs.

We've configured the internal dial to 2, and can see our inputs coming into the PLC with no problems. However, our outputs do not come on through the Flex I/O. Specifically, we do not see them come on on the Flex I/O unit itself.

Any ideas?

Thanks.
 

Similar Topics

W
Powerflex 525
Fairly new to the drive so apologise for the layman terms. Textile machine uses PF525 VFDs to control motors. The speed of the drive is currently...
Replies
5
Views
127
Wardy89
W
G
Powerflex 40 Firmware update
Hello Everyone, I want to upgrade the firmware of Powerflex 40 from 5.001 to 6.002 can anyone tell me how can I do that?
Replies
0
Views
65
ghulamshoaib
G
A
Communication Issues between PowerFlex 700 and M580 Controller
Hello, I am currently in the final week of my internship and I have encountered issues with communication between a PowerFlex 700 variable...
Replies
8
Views
241
Lare
L
M
DeviceNet-Powerflex 70 VFD
Hi there, I have above mentioned VFD which is communicating to my control logix(L62) plc using devicenet DNB scanner(plc side) and 20-comm-D card...
Replies
3
Views
188
MarvelJoe872
M
N
PowerFlex 252 - The Software Has Encountered An Unexpected Error
Hi, I'm currently having issued with a PowerFlex 252. It was working fine last week, and suddenly decided to stop working. When I go into...
Replies
2
Views
137
nievesdelimon
N
Back
Top Bottom