Hi, guys,
I have SIMATIC S7 software STEP7 Ver 5.3 with SIMATIC S7 PC ADAPTER USB ( 6ES7 072-0CB20-0XA0 ). At the moment I have a proble with ONLINE and UPLOAD the PLC program, type of PLC is I/O distribution system ET200S with connection to SINUMERIK 840D.
Please anyone knows how to make ONLINE and UPLOAD the existing PLC program because when I run the STEP 7, there are some setting for Set PG/PC interface. If I use this USB adapter ( 6ES7 972-0CB20-0XA0 ), do I have to go OPTIONS, click on SET PG/PC INTERFACE, then on PC ADAPTER ( MPI ) there are : STATION PARAMETER ( address and timeout ) & NETWORK PARAMETER ( transmission rate and highest station address ). Please inform me what VALUE that I have to put on these parameter ?
Regards,
INDRA
I have SIMATIC S7 software STEP7 Ver 5.3 with SIMATIC S7 PC ADAPTER USB ( 6ES7 072-0CB20-0XA0 ). At the moment I have a proble with ONLINE and UPLOAD the PLC program, type of PLC is I/O distribution system ET200S with connection to SINUMERIK 840D.
Please anyone knows how to make ONLINE and UPLOAD the existing PLC program because when I run the STEP 7, there are some setting for Set PG/PC interface. If I use this USB adapter ( 6ES7 972-0CB20-0XA0 ), do I have to go OPTIONS, click on SET PG/PC INTERFACE, then on PC ADAPTER ( MPI ) there are : STATION PARAMETER ( address and timeout ) & NETWORK PARAMETER ( transmission rate and highest station address ). Please inform me what VALUE that I have to put on these parameter ?
Regards,
INDRA